Hobbyist or repairer
Game Boy CPU Transplant! Fixing Dead Buttons (Super Game Boy Donor)
After a ribbon cable was shifted with the power on, a Game Boy DMG lost its left D-pad and B button, and a CPU taken from a Super Game Boy replaces it.
Topic
14 videos.
When a chip dies, the symptoms look like a black screen, scrambled graphics, no sound or a machine that will not load games. A repairer first works out which chip is at fault with a meter or a scope, since lifting a chip that was never at fault puts pads and tracks at risk for nothing.
Console examples start with a Super Nintendo CPU or PPU repair, which sets out tips for telling them apart. A Commodore 64 with wild colours gets a colour RAM and PLA swap. On an arcade board, replacing a sound amplifier is a single-part job. For fault finding first, try diagnostics.
Taking chips off a board needs a hot iron or hot air, so expect burns and fumes, with lead in old solder. Heat can also lift pads. Use good airflow and let the board cool before handling it.
Hobbyist or repairer
After a ribbon cable was shifted with the power on, a Game Boy DMG lost its left D-pad and B button, and a CPU taken from a Super Game Boy replaces it.
Hobbyist or repairer
Multimeter checks, treatment of battery leakage and a full recap are followed by chip swaps, including the IR3R40 audio amplifier, on a Game Boy DMG that began with no power, sound or picture.
Hobbyist or repairer
An Amiga 500 with original Varta battery damage gets a new CIA, ROM work, a resistor removed and an LS157N mouse controller chip, followed by a deep clean and repainted metal.
Hobbyist or repairer
Black screens, corrupt graphics and games that refuse to load on a Super Nintendo can point to a faulty CPU or PPU, and the maker sets out tips for diagnosing it.
Hobbyist or repairer
Replacing sockets, reset and enable circuit chips and removing a shorted trace brings a Midway Galaga board back, using a Fluke 1090A to chase reset, ROM and RAM faults.
Hobbyist or repairer
Overcurrent damage to a Nintendo Punch-Out arcade board is narrowed to the audio amplifier circuit and an LA324 chip, with repairs to battery leakage damage as well.
Hobbyist or repairer
A GeForce 2 MX owned since 2001 stopped giving any picture, and chip removal practice later made the damage worse. Bits und Bolts tries to fix it twenty years on.
Hobbyist or repairer
Moving the CPU and RAM from an original Game Boy Advance board onto a Funnyplaying replacement motherboard is the job here. The maker rates it as advanced soldering work.
Hobbyist or repairer
A ZIF 64 diagnostic tool is built from spare Commodore 64 parts, then used to test some old Commodore chips for faults.
Hobbyist or repairer
Dead real-time clock modules such as the Dallas DS1287 are the target of the nwX287, a drop-in replacement the maker presents for that chip and for the BQ3287, BQ4287 and ODN12C887.
Hobbyist or repairer
A 1987 PC XT clone with a RAM problem goes on the bench, and the maker makes a new BIOS ROM from the Super PC/XT Turbo BIOS and tests it.
Hobbyist or repairer
Why does a bread-bin Commodore 64 flash psychedelic characters? The repair goes through a colour RAM swap, a PLA replacement and a sticking shift lock key, then a round of tests.
Hobbyist or repairer
How is the sound amplifier on a 1980 Midway Pac-Man board replaced? Classic Arcade Repairs takes out the old amplifier and fits a new one.
Hobbyist or repairer
A Commodore 64 mainboard (assembly 250407) powers up to a black screen, and the maker troubleshoots it, with links on PLA chips and on how the maker removes chips.